添加共享打印机失败

Linux is a popular open source operating system. It is widely used by many individuals and businesses. It has been around for over two decades, and has been a great source of free and open source software. In recent years, sharing of files and resources such as printers has become a common activity in many offices.

Adding a printer to a Linux system is relatively simple. However, if the printer is shared by multiple computers, the task can become complicated. The primary issue is networking. Every computer in the network must be set up to recognize and communicate with the printer. This can be done using a combination of IP addresses and file sharing protocols.

The first step is to identify the existing IP address of the printer. This can usually be done by going into the printer settings menu and selecting the “Network” tab. Here, the IP address of the printer should be listed.

Once the IP address of the printer is known, it is time to set up the networks on the computer that will share the printer. It is important to ensure that all of the computers are in the same network, as this is necessary for sharing the printer. Once the networks are set up correctly, the next step is to setup the printer sharing protocol.

In most cases, this will be Samba, as it is the most common file-sharing protocol used on Linux systems. It is necessary to configure the Samba settings on the computer that will share the printer, as well as the printer itself. This can usually be done through a web-based control panel or by opening the Linux terminal.

After setting up the networks and Samba, the printer can then be tested. It is important to make sure that the printer is correctly configured and is able to print correctly. Once the printer is functional, it can then be shared with other computers. This can usually be done by creating a printer queue and sharing the printer with the other computers.

Adding a shared printer to a Linux system is not a difficult task if all of the networking and Samba settings are correctly configured. However, it can become complicated if the printer is located on a different network, as additional configuration will be required. Nonetheless, it is generally a straightforward process and should not cause too many problems.