兄弟打印机2240D加粉清零步骤(兄弟打印机2240D如何进行加粉后的清零操作？)

Introduction

Brother 2240D is a laser monochrome printer that is capable of producing high quality prints at an affordable cost. Like most printers, the toner cartridge on a Brother 2240D needs to be refilled or replaced after prolonged use. After the toner cartridge is refilled, the printer requires to be reset in order to clear any error message and give room for its monitoring system to recognize the new toner level. In this article, we will outline the steps required to reset a Brother 2240D printer after a toner replacement or refill.

Step 1: Locate the Necessary Buttons

Firstly, locate the right-hand side of the printer where the buttons are located. For a Brother 2240D printer, there are only two buttons that are relevant for this process; the ‘Go’ button and the ‘Cancel’ button.

Step 2: Put the Printer in Ready State

The next step is to ensure that the printer is in a ready state before proceeding with the reset process. To do that, apply the following steps:

Turn the printer off and unplug it from the power source.

Plug the printer back in and press and hold the ‘Go’ button while simultaneously turning the printer on.

The printer will automatically enter its ready state, with the two main indicators; the ‘Ready’ indicator and ‘Drum’ indicator, illuminating.

Release the ‘Go’ button after the indicators have lit up.

Step 3: Perform the Toner Reset

The next step is to peform the actual toner reset. Follow the steps below to carry out this process:

Press and hold the ‘Go’ button for 4 seconds.

Release the button. At this point, the ‘Ready’ indicator light will begin to flash.

Press the ‘Go’ button twice in quick succession. The ‘Ready’ indicator will light up and turn off.

Wait for the ‘Drum’ indicator to light up.

Press and release the ‘Go’ button again. The ‘Drum’ light will turn off.

The toner reset is complete, and the printer should not display any toner level error messages.

Conclusion

The process of resetting a Brother 2240D printer after a toner replacement or refill is a straightforward process that can be completed by following the steps outlined above. The process is essential to ensure that the printer is calibrated to recognize the new toner levels accurately and prevent any error message related to toner level from being displayed.