两个路由 打印机 共享

段

1. To configure two routers as a printer-sharing network, begin by connecting the routers to each other using an Ethernet cable. The Ethernet cable should be connected to the WAN port of each router.

2. Go to the web-based interface for each of the routers and configure them for wireless networking. On each router, make sure that the same wireless channel is selected and that the same wireless security protocol (WPA2) is enabled.

3. On each router, create two network addresses that are unique. For example, the first router can use addresses 192.168.0.1 and 192.168.1.1 while the second router uses addresses 192.168.2.1 and 192.168.3.1.

4. Configure the routers with the appropriate IP addresses and subnets. For example, the first router can use IP address 192.168.0.1 with a subnet mask of 255.255.255.0 while the second router can use IP address 192.168.2.1 with a subnet mask of 255.255.255.0.

5. Connect the printer to one of the routers and configure the printer for network sharing. To do this, go to the printer’s settings and select the option for “Network Sharing”.

6. Configure the other router to access the printer from the other network. To do this, go to the router’s settings and add the printer’s IP address to the list of allowed connections.

7. Test the network by printing from both computers. If all goes well, you should now have successful printer-sharing network with two routers.