衡力针式打印机驱动

节

Hengli needle printer driver 700 bytes

1.安装前准备

1. Pre-installation preparation

驱动程序的关键是打印机控制命令，使得操作系统和打印机之间的控制通信发生的时候，操作系统能把正确的命令发送到打印机里。在安装Hengli针式打印机驱动程序之前，要先准备好打印机及驱动安装包。

The key of driver program is the printer control command, which makes the control communication between the operating system and the printer happen, and the operating system can send the correct command to the printer. Before installing the Hengli needle printer driver, the printer and driver installation package should be prepared.

2.安装步骤

2. Installation steps

（1）双击驱动文件。弹出安装框，点击“下一步”，按照安装提示安装即可。

(1) Double-click the driver file. Pop up the installation box, click "Next", and follow the installation prompt to install.

（2）连接打印机和电脑：将打印机的连接线插到电脑的串口或者并口上，用系统的设备管理器中查看是否驱动安装成功。

(2) Connect printer and computer: plug the printer's connecting line into the computer's serial port or parallel port, and check whether the driver installation is successful in the system's Device Manager.

（3）在桌面右键点击“设备和打印机”，在弹出菜单中选择“添加打印机”，点击“确定”，系统会自动搜索可用的打印机，选择Hengli针式打印机，然后点击“下一步”，按照安装提示安装打印机驱动程序；

(3) Right-click the desktop and select "Devices and Printers" in the pop-up menu. Click "Add Printer", click "OK" and the system will automatically search for available printers. Select Hengli needle printer, then click "Next" and follow the installation prompt to install the printer driver;

（4）安装完成后重启电脑，在桌面右键点击“设备和打印机”，可以看到Hengli针式打印机的名称，可以正常使用了。

(4) After installation, restart the computer, right-click the desktop and select "Devices and Printers", you can see the name of Hengli needle printer, can be used normally.